3D printer build volumes: 152 printers compared

Name: 3D printer build volumes (splicestl preset list)
Creator: splicestl
License: https://creativecommons.org/licenses/by/4.0/

By Ned Walsch · Published 13 October 2026 · Data as of 2026-10-31 · generated from splicestl v3.4's preset list

This page lists the nominal build volume (X × Y × Z, in millimetres) of 152 FDM 3D printers from 25 manufacturers — the same values splicestl uses to decide how many cuts a model needs. The table is sortable and filterable, and the whole set downloads as CSV under CC BY 4.0.

Median bed: 256 × 250 × 265 mm (16.8 L).
Smallest: Voron Design Voron 0.1 / 0.2, 120 × 120 × 120 mm (1.7 L). Largest: Modix BIG-180X, 1800 × 600 × 640 mm (691 L).
29% of listed printers have a bed of 220 mm or less on its longer side; 53% are 256 mm or less; 74% are 300 mm or less.
81 of 152 printers are taller (Z) than their bed is wide — the case where rotating a model upright avoids a split.

Download CSV (152 rows) Split a model for one of these printers →

Why this table exists

"Will this model fit my printer?" is the first question behind every STL split, and the answer depends on three numbers that are scattered across 25 manufacturers' spec pages. splicestl keeps them in one list so the tool can pick the cut count for you. Publishing the list lets anyone reuse it — for a slicer profile, a purchasing comparison, or a script — and lets you check the exact value the tool will use before you cut.

The data

Filter by brand or model (for example "Bambu", "Ender", "Voron")

Brand	Model	X (mm)	Y (mm)	Z (mm)	Volume (L)
Anet	A8	220	220	240	11.6
Anet	ET4	220	220	250	12.1
Anycubic	Chiron	400	400	450	72.0
Anycubic	i3 Mega	210	210	205	9.0
Anycubic	Kobra	220	220	250	12.1
Anycubic	Kobra 2	220	220	250	12.1
Anycubic	Kobra 2 Max	420	420	500	88.2
Anycubic	Kobra 2 Plus	320	320	400	41.0
Anycubic	Kobra 2 Pro	220	220	250	12.1
Anycubic	Kobra 3	250	250	260	16.2
Anycubic	Kobra 3 Max	420	420	500	88.2
Anycubic	Kobra Go	220	220	250	12.1
Anycubic	Kobra Max	400	400	450	72.0
Anycubic	Kobra Neo	220	220	250	12.1
Anycubic	Kobra Plus	300	300	350	31.5
Anycubic	Mega Pro	210	210	205	9.0
Anycubic	Mega X	300	300	305	27.4
Anycubic	Mega Zero	220	220	250	12.1
Anycubic	Vyper	245	245	260	15.6
Artillery	Genius	220	220	250	12.1
Artillery	Genius Pro	220	220	250	12.1
Artillery	Hornet	220	220	250	12.1
Artillery	Sidewinder X1	300	300	400	36.0
Artillery	Sidewinder X2	300	300	400	36.0
Artillery	Sidewinder X3	240	240	260	15.0
Artillery	Sidewinder X4 Plus	300	300	400	36.0
Artillery	Sidewinder X4 Pro	300	300	400	36.0
Bambu Lab	A1	256	256	256	16.8
Bambu Lab	A1 mini	180	180	180	5.8
Bambu Lab	H2D	350	320	325	36.4
Bambu Lab	P1P	256	256	256	16.8
Bambu Lab	P1S	256	256	256	16.8
Bambu Lab	X1	256	256	256	16.8
Bambu Lab	X1 Carbon	256	256	256	16.8
Bambu Lab	X1E	256	256	256	16.8
BIQU	B1	235	235	270	14.9
BIQU	Hurakan	235	235	270	14.9
Creality	CR-10	300	300	400	36.0
Creality	CR-10 S5	500	500	500	125.0
Creality	CR-10 SE	220	220	265	12.8
Creality	CR-10 Smart Pro	300	300	400	36.0
Creality	CR-200B	200	200	200	8.0
Creality	CR-30 (belt)	200	170	1000	34.0
Creality	Ender 3 / 3 V2 / 3 Pro	220	220	250	12.1
Creality	Ender 3 Max	300	300	340	30.6
Creality	Ender 3 V3	220	220	250	12.1
Creality	Ender 3 V3 KE	220	220	240	11.6
Creality	Ender 5	220	220	300	14.5
Creality	Ender 5 Plus	350	350	400	49.0
Creality	Ender 5 S1	220	220	280	13.6
Creality	Ender 6	250	250	400	25.0
Creality	Ender 7	250	250	300	18.8
Creality	K1	220	220	250	12.1
Creality	K1 Max	300	300	300	27.0
Creality	K1 SE	220	220	250	12.1
Creality	K1 Speedy	220	220	250	12.1
Creality	K1C	220	220	250	12.1
Creality	K2 Plus	350	350	350	42.9
Elegoo	Centauri Carbon	256	256	256	16.8
Elegoo	Neptune 2	220	220	250	12.1
Elegoo	Neptune 3	220	220	280	13.6
Elegoo	Neptune 3 Max	420	420	500	88.2
Elegoo	Neptune 3 Plus	320	320	400	41.0
Elegoo	Neptune 3 Pro	225	225	280	14.2
Elegoo	Neptune 4	225	225	265	13.4
Elegoo	Neptune 4 Max	420	420	480	84.7
Elegoo	Neptune 4 Plus	320	320	385	39.4
Elegoo	Neptune 4 Pro	225	225	265	13.4
FlashForge	Adventurer 3	150	150	150	3.4
FlashForge	Adventurer 4	220	200	250	11.0
FlashForge	Adventurer 5M	220	220	220	10.6
FlashForge	Adventurer 5M Pro	220	220	220	10.6
FlashForge	Creator 3 Pro	300	250	200	15.0
FlashForge	Creator Pro 2	200	148	150	4.4
FlashForge	Guider 2S	280	250	300	21.0
FlashForge	Guider 3 Plus	350	350	600	73.5
FLSun	Q5	200	200	200	8.0
FLSun	QQ-S Pro	255	255	360	23.4
FLSun	Super Racer	260	260	330	22.3
FLSun	T1 Pro	260	260	330	22.3
FLSun	V400	300	300	410	36.9
Kingroon	KP3S	180	180	180	5.8
Kingroon	KP3S Pro	200	200	200	8.0
Kingroon	KP5L	300	300	330	29.7
LulzBot	Mini 2	160	160	180	4.6
LulzBot	TAZ Pro	280	280	285	22.3
LulzBot	TAZ Workhorse	280	280	285	22.3
Markforged	Mark Two	320	132	154	6.5
Markforged	Onyx One	320	132	154	6.5
Markforged	X7	330	270	200	17.8
Mingda	Magician X2	230	230	260	13.8
Mingda	Rock 3 Pro	400	400	400	64.0
Modix	BIG-120X	1200	600	640	460.8
Modix	BIG-180X	1800	600	640	691.2
Modix	BIG-60 V4	600	600	660	237.6
Prusa	Core One	250	220	270	14.8
Prusa	i3 MK2S	250	210	200	10.5
Prusa	i3 MK3	250	210	210	11.0
Prusa	i3 MK3S+	250	210	210	11.0
Prusa	Mini+	180	180	180	5.8
Prusa	MK4	250	210	220	11.6
Prusa	MK4S	250	210	220	11.6
Prusa	XL	360	360	360	46.7
QIDI	i-mate S	260	200	200	10.4
QIDI	Plus 4	305	305	280	26.0
QIDI	Q1 Pro	245	245	240	14.4
QIDI	Tech X-3	300	250	300	22.5
QIDI	X-Max 3	325	325	315	33.3
QIDI	X-Plus 3	280	280	270	21.2
Raise3D	E2	330	240	240	19.0
Raise3D	Pro2	305	305	300	27.9
Raise3D	Pro2 Plus	305	305	605	56.3
Raise3D	Pro3	300	300	300	27.0
Raise3D	Pro3 Plus	300	300	605	54.5
Raise3D	RMF500	500	500	500	125.0
Rat Rig	V-Core 3 (300)	300	300	300	27.0
Rat Rig	V-Core 4 (500)	500	500	500	125.0
Snapmaker	2.0 A150	160	160	145	3.7
Snapmaker	2.0 A250	230	250	235	13.5
Snapmaker	2.0 A350	320	350	330	37.0
Snapmaker	Artisan	400	400	400	64.0
Snapmaker	J1	300	200	200	12.0
Sovol	SV01	280	240	300	20.2
Sovol	SV02	240	240	260	15.0
Sovol	SV04 IDEX	300	300	400	36.0
Sovol	SV06	220	220	250	12.1
Sovol	SV06 Plus	300	300	340	30.6
Sovol	SV07	220	220	250	12.1
Sovol	SV07 Plus	300	300	340	30.6
Sovol	SV08	350	350	345	42.3
Tronxy	X5SA	330	330	400	43.6
Tronxy	X5SA-400	400	400	400	64.0
Tronxy	XY-2 Pro	255	255	260	16.9
Two Trees	Bluer Plus	300	300	400	36.0
Two Trees	Sapphire Plus	300	300	350	31.5
Two Trees	Sapphire Pro	235	235	235	13.0
UltiMaker	2+ Connect	223	220	205	10.1
UltiMaker	Factor 4	330	240	300	23.8
UltiMaker	Method X	190	190	196	7.1
UltiMaker	S3	230	190	200	8.7
UltiMaker	S5	330	240	300	23.8
UltiMaker	S7	330	240	300	23.8
Voron Design	Voron 0.1 / 0.2	120	120	120	1.7
Voron Design	Voron 2.4 (250)	250	250	250	15.6
Voron Design	Voron 2.4 (300)	300	300	300	27.0
Voron Design	Voron 2.4 (350)	350	350	350	42.9
Voron Design	Voron Switchwire	250	250	250	15.6
Voron Design	Voron Trident (250)	250	250	250	15.6
Voron Design	Voron Trident (300)	300	300	250	22.5
Voron Design	Voron Trident (350)	350	350	250	30.6
Wanhao	Duplicator 12	230	200	230	10.6
Wanhao	Duplicator 6	200	200	175	7.0

152 of 152 printers shown. Click a column header to sort. Linked models have their own page with the derived numbers (largest cube, diagonal, pieces needed) and a preset deep link.

Printer pages

One page per popular printer — what fits, how many pieces a 300–800 mm model needs, printer-specific notes and the nearest printers by volume:

What the numbers say

Statistic	Value
Printers listed	152, from 25 brands
Median X / Y / Z	256 / 250 / 265 mm
Median build volume	16.8 litres
Printers with a 256 × 256 × 256 mm volume (the Bambu X1/P1/A1 size)	7
Printers with a 220 × 220 mm bed (the Ender 3 size)	27
Bed ≤ 220 mm on its longer side	29%
Bed ≤ 300 mm on its longer side	74%
Bed > 400 mm on its longer side	7%
Taller than wide (Z > max(X, Y))	81 printers

Two practical consequences. First, for the typical 220–256 mm bed, any model over about 250 mm in its longest dimension needs either a rotation or a split; the guide to printing bigger than your build plate walks through the order to try those in. Second, because Z is often taller than the bed, standing a long model upright is the cheapest fix and should be tried before cutting.

How the list was compiled, and its limits

Source. Each row is the x, y, z value from splicestl's PRINTER_PRESETS table, which was assembled from the manufacturers' published specifications. This page is generated from that table by a script, so it always matches what the tool does.
Nominal, not usable. Values are the manufacturer's stated maximum. Real usable area is smaller once you subtract skirts, brims, purge lines and clip exclusion zones. splicestl's defaults already leave a margin; if your slicer reports a smaller printable area, enter that instead.
Grouped variants. Closely related models with identical volumes are listed on one row (for example "Ender 3 / 3 V2 / 3 Pro").
Delta and CoreXY printers. Delta printers (FLSun) have a circular bed; X and Y give the diameter.
Corrections. Manufacturers revise specs. If a value is wrong, email nedwalsch@gmail.com with a link to the spec sheet and the preset and this page will be updated together.
License. The dataset is CC BY 4.0: reuse it for anything, with attribution to splicestl.com.

What changed: first published 13 October 2026 with 152 printers from splicestl v3.4. The page regenerates whenever the preset list changes; the "data as of" date above is the regeneration date.