Artillery Sidewinder X2 build volume: 300 × 300 × 400 mm — what fits, and how to print what doesn't
Quick answer: the Artillery Sidewinder X2 prints objects up to 300 × 300 × 400 mm (X × Y × Z, that is width × depth × height) — 36.0 litres, which ranks #32 of 152 printers in the dataset. The largest cube is 300 mm; a thin flat part can reach about 414 mm along the bed diagonal. Anything bigger is split into pieces with connectors — the splitter has a Artillery Sidewinder X2 preset.
What the numbers mean for your model
Build volume is quoted as the box the nozzle can reach, X × Y × Z. A model fits whole when it fits that box in some orientation, which is more forgiving than it sounds: a long flat part can lie diagonally across the 300 × 300 mm bed (diagonal 424 mm, so about 414 mm usable once a margin is left for the brim), and a tall part can stand up to 400 mm if its footprint fits. The splitter checks every orientation before it decides a model needs cutting, and reports "already fits" when it does.
When it does not fit, the number of pieces depends on which axis overflows. If only the longest dimension is too big, this is what a Artillery Sidewinder X2 needs, allowing a 2 mm margin per piece:
| Model's longest side | On the Artillery Sidewinder X2 | Piece length |
|---|---|---|
| 250 mm | fits whole | — |
| 300 mm | fits whole | — |
| 400 mm | 2 pieces | 200 mm each |
| 500 mm | 2 pieces | 250 mm each |
| 600 mm | 2 pieces | 300 mm each |
| 800 mm | 3 pieces | 267 mm each |
Pieces along the printer's longest axis (400 mm). A model that overflows two axes needs the product of the two counts — the splitter plans that automatically, and usually finds a layout with fewer pieces than the naive grid by rotating the model first.
Artillery Sidewinder X2 notes
The Sidewinder X2 prints 300 × 300 × 400 mm, 36 litres — the CR-10 volume with a direct-drive extruder and a quiet board. The 400 mm Z makes it a good printer for standing pieces; its large glass bed holds big PLA pieces without a brim.
Printers with a similar build volume
| Printer | X × Y × Z (mm) | Litres | Rank |
|---|---|---|---|
| Artillery Sidewinder X1 | 300 × 300 × 400 | 36.0 | #31 |
| Artillery Sidewinder X4 Plus | 300 × 300 × 400 | 36.0 | #33 |
| Artillery Sidewinder X4 Pro | 300 × 300 × 400 | 36.0 | #34 |
| Creality CR-10 | 300 × 300 × 400 | 36.0 | #35 |
| Creality CR-10 Smart Pro | 300 × 300 × 400 | 36.0 | #36 |
| Sovol SV04 IDEX | 300 × 300 × 400 | 36.0 | #37 |
Other Artillery printers in the dataset: Artillery Genius, Artillery Genius Pro, Artillery Hornet, Artillery Sidewinder X1, Artillery Sidewinder X3, Artillery Sidewinder X4 Plus, Artillery Sidewinder X4 Pro.
Split a model for the Artillery Sidewinder X2
- Open splicestl with the Artillery Sidewinder X2 preset selected and drop the STL, 3MF or OBJ on the page. Nothing is uploaded.
- The split runs by itself to 300 × 300 × 400 mm minus a margin, on all three axes at once. Drag a cut handle to move a seam; Shift-click the model to mark a spot a seam must avoid.
- Pick connectors — pegs by default; dovetails, finger joints, magnet pockets, dowel holes, screw joints or your own — and download the zip: one file per piece lying flat, the connectors, a README and an assembly sheet.
Frequently asked questions
What is the build volume of the Artillery Sidewinder X2?
300 × 300 × 400 mm (width × depth × height), which is 36.0 litres. That is the manufacturer's stated printable volume as used by splicestl's Artillery Sidewinder X2 preset; the physical bed may be a few millimetres larger.
What is the largest object you can print on the Artillery Sidewinder X2?
A 300 mm cube fits outright. A flat part can be longer by lying on the bed diagonal: up to about 414 mm long if it is narrow and under 400 mm tall. A tall part can stand 400 mm high if its footprint is within 300 × 300 mm. Anything that exceeds these in any orientation has to be split.
How do I print something bigger than the Artillery Sidewinder X2's build volume?
Split it into pieces that each fit, add connectors at the cuts, print the pieces and join them. The free browser splitter at splicestl.com has a Artillery Sidewinder X2 preset: load the STL, 3MF or OBJ, choose the preset, and the model is cut on all three axes to fit 300 × 300 × 400 mm with pegs, dovetails or magnet pockets placed at every cut. Download gives one file per piece plus an assembly sheet.
Related
Source and changes. Dimensions are the manufacturer's published specification as recorded in the splicestl build-volume dataset (CC BY 4.0; the tool's preset table, read 13 October 2026). Derived figures (litres, diagonal, rank, piece counts) are computed from those three numbers by tools/build-printer-pages.py. Page published 31 October 2026. If the manufacturer has changed the specification, tell us and the dataset, the preset and this page change together.