Sovol SV06 Plus build volume: 300 × 300 × 340 mm — what fits, and how to print what doesn't
Quick answer: the Sovol SV06 Plus prints objects up to 300 × 300 × 340 mm (X × Y × Z, that is width × depth × height) — 30.6 litres, which ranks #45 of 152 printers in the dataset. The largest cube is 300 mm; a thin flat part can reach about 414 mm along the bed diagonal. Anything bigger is split into pieces with connectors — the splitter has a Sovol SV06 Plus preset.
What the numbers mean for your model
Build volume is quoted as the box the nozzle can reach, X × Y × Z. A model fits whole when it fits that box in some orientation, which is more forgiving than it sounds: a long flat part can lie diagonally across the 300 × 300 mm bed (diagonal 424 mm, so about 414 mm usable once a margin is left for the brim), and a tall part can stand up to 340 mm if its footprint fits. The splitter checks every orientation before it decides a model needs cutting, and reports "already fits" when it does.
When it does not fit, the number of pieces depends on which axis overflows. If only the longest dimension is too big, this is what a Sovol SV06 Plus needs, allowing a 2 mm margin per piece:
| Model's longest side | On the Sovol SV06 Plus | Piece length |
|---|---|---|
| 250 mm | fits whole | — |
| 300 mm | fits whole | — |
| 400 mm | 2 pieces | 200 mm each |
| 500 mm | 2 pieces | 250 mm each |
| 600 mm | 2 pieces | 300 mm each |
| 800 mm | 3 pieces | 267 mm each |
Pieces along the printer's longest axis (340 mm). A model that overflows two axes needs the product of the two counts — the splitter plans that automatically, and usually finds a layout with fewer pieces than the naive grid by rotating the model first.
Sovol SV06 Plus notes
The SV06 Plus steps up to 300 × 300 × 340 mm, 30.6 litres — the same volume as the Ender 3 Max — which prints most helmets and busts whole. Its 340 mm Z is a good fit for standing pieces of a split model.
Printers with a similar build volume
| Printer | X × Y × Z (mm) | Litres | Rank |
|---|---|---|---|
| Creality Ender 3 Max | 300 × 300 × 340 | 30.6 | #44 |
| Sovol SV07 Plus | 300 × 300 × 340 | 30.6 | #46 |
| Voron Design Voron Trident (350) | 350 × 350 × 250 | 30.6 | #43 |
| Anycubic Kobra Plus | 300 × 300 × 350 | 31.5 | #41 |
| Two Trees Sapphire Plus | 300 × 300 × 350 | 31.5 | #42 |
| Kingroon KP5L | 300 × 300 × 330 | 29.7 | #47 |
Other Sovol printers in the dataset: Sovol SV01, Sovol SV02, Sovol SV04 IDEX, Sovol SV06, Sovol SV07, Sovol SV07 Plus, Sovol SV08.
Split a model for the Sovol SV06 Plus
- Open splicestl with the Sovol SV06 Plus preset selected and drop the STL, 3MF or OBJ on the page. Nothing is uploaded.
- The split runs by itself to 300 × 300 × 340 mm minus a margin, on all three axes at once. Drag a cut handle to move a seam; Shift-click the model to mark a spot a seam must avoid.
- Pick connectors — pegs by default; dovetails, finger joints, magnet pockets, dowel holes, screw joints or your own — and download the zip: one file per piece lying flat, the connectors, a README and an assembly sheet.
Frequently asked questions
What is the build volume of the Sovol SV06 Plus?
300 × 300 × 340 mm (width × depth × height), which is 30.6 litres. That is the manufacturer's stated printable volume as used by splicestl's Sovol SV06 Plus preset; the physical bed may be a few millimetres larger.
What is the largest object you can print on the Sovol SV06 Plus?
A 300 mm cube fits outright. A flat part can be longer by lying on the bed diagonal: up to about 414 mm long if it is narrow and under 340 mm tall. A tall part can stand 340 mm high if its footprint is within 300 × 300 mm. Anything that exceeds these in any orientation has to be split.
How do I print something bigger than the Sovol SV06 Plus's build volume?
Split it into pieces that each fit, add connectors at the cuts, print the pieces and join them. The free browser splitter at splicestl.com has a Sovol SV06 Plus preset: load the STL, 3MF or OBJ, choose the preset, and the model is cut on all three axes to fit 300 × 300 × 340 mm with pegs, dovetails or magnet pockets placed at every cut. Download gives one file per piece plus an assembly sheet.
Related
Source and changes. Dimensions are the manufacturer's published specification as recorded in the splicestl build-volume dataset (CC BY 4.0; the tool's preset table, read 13 October 2026). Derived figures (litres, diagonal, rank, piece counts) are computed from those three numbers by tools/build-printer-pages.py. Page published 31 October 2026. If the manufacturer has changed the specification, tell us and the dataset, the preset and this page change together.