Voron Design Voron 2.4 (350) build volume: 350 × 350 × 350 mm — what fits, and how to print what doesn't
Quick answer: the Voron Design Voron 2.4 (350) prints objects up to 350 × 350 × 350 mm (X × Y × Z, that is width × depth × height) — 42.9 litres, which ranks #23 of 152 printers in the dataset. The largest cube is 350 mm; a thin flat part can reach about 485 mm along the bed diagonal. Anything bigger is split into pieces with connectors — the splitter has a Voron Design Voron 2.4 (350) preset.
What the numbers mean for your model
Build volume is quoted as the box the nozzle can reach, X × Y × Z. A model fits whole when it fits that box in some orientation, which is more forgiving than it sounds: a long flat part can lie diagonally across the 350 × 350 mm bed (diagonal 495 mm, so about 485 mm usable once a margin is left for the brim), and a tall part can stand up to 350 mm if its footprint fits. The splitter checks every orientation before it decides a model needs cutting, and reports "already fits" when it does.
When it does not fit, the number of pieces depends on which axis overflows. If only the longest dimension is too big, this is what a Voron Design Voron 2.4 (350) needs, allowing a 2 mm margin per piece:
| Model's longest side | On the Voron Design Voron 2.4 (350) | Piece length |
|---|---|---|
| 250 mm | fits whole | — |
| 300 mm | fits whole | — |
| 400 mm | 2 pieces | 200 mm each |
| 500 mm | 2 pieces | 250 mm each |
| 600 mm | 2 pieces | 300 mm each |
| 800 mm | 3 pieces | 267 mm each |
Pieces along the printer's longest axis (350 mm). A model that overflows two axes needs the product of the two counts — the splitter plans that automatically, and usually finds a layout with fewer pieces than the naive grid by rotating the model first.
Voron Design Voron 2.4 (350) notes
The Voron 2.4 at 350 mm is the largest of the three standard sizes (250, 300, 350), 42.9 litres, and the volume most large self-built CoreXYs are compared against. A flying-gantry CoreXY with an enclosure, it prints ABS pieces of a split model with little warping, and the stable bed makes tall standing pieces safe. Build kits vary by a few millimetres in usable Z depending on the bed and panel choice; the preset uses the nominal 350 × 350 × 350 that most kit vendors quote.
Printers with a similar build volume
| Printer | X × Y × Z (mm) | Litres | Rank |
|---|---|---|---|
| Creality K2 Plus | 350 × 350 × 350 | 42.9 | #22 |
| Sovol SV08 | 350 × 350 × 345 | 42.3 | #24 |
| Tronxy X5SA | 330 × 330 × 400 | 43.6 | #21 |
| Anycubic Kobra 2 Plus | 320 × 320 × 400 | 41.0 | #25 |
| Elegoo Neptune 3 Plus | 320 × 320 × 400 | 41.0 | #26 |
| Elegoo Neptune 4 Plus | 320 × 320 × 385 | 39.4 | #27 |
Other Voron Design printers in the dataset: Voron Design Voron 0.1 / 0.2, Voron Design Voron 2.4 (250), Voron Design Voron 2.4 (300), Voron Design Voron Switchwire, Voron Design Voron Trident (250), Voron Design Voron Trident (300), Voron Design Voron Trident (350).
Split a model for the Voron Design Voron 2.4 (350)
- Open splicestl with the Voron Design Voron 2.4 (350) preset selected and drop the STL, 3MF or OBJ on the page. Nothing is uploaded.
- The split runs by itself to 350 × 350 × 350 mm minus a margin, on all three axes at once. Drag a cut handle to move a seam; Shift-click the model to mark a spot a seam must avoid.
- Pick connectors — pegs by default; dovetails, finger joints, magnet pockets, dowel holes, screw joints or your own — and download the zip: one file per piece lying flat, the connectors, a README and an assembly sheet.
Frequently asked questions
What is the build volume of the Voron Design Voron 2.4 (350)?
350 × 350 × 350 mm (width × depth × height), which is 42.9 litres. That is the manufacturer's stated printable volume as used by splicestl's Voron Design Voron 2.4 (350) preset; the physical bed may be a few millimetres larger.
What is the largest object you can print on the Voron Design Voron 2.4 (350)?
A 350 mm cube fits outright. A flat part can be longer by lying on the bed diagonal: up to about 485 mm long if it is narrow and under 350 mm tall. A tall part can stand 350 mm high if its footprint is within 350 × 350 mm. Anything that exceeds these in any orientation has to be split.
How do I print something bigger than the Voron Design Voron 2.4 (350)'s build volume?
Split it into pieces that each fit, add connectors at the cuts, print the pieces and join them. The free browser splitter at splicestl.com has a Voron Design Voron 2.4 (350) preset: load the STL, 3MF or OBJ, choose the preset, and the model is cut on all three axes to fit 350 × 350 × 350 mm with pegs, dovetails or magnet pockets placed at every cut. Download gives one file per piece plus an assembly sheet.
Related
Source and changes. Dimensions are the manufacturer's published specification as recorded in the splicestl build-volume dataset (CC BY 4.0; the tool's preset table, read 13 October 2026). Derived figures (litres, diagonal, rank, piece counts) are computed from those three numbers by tools/build-printer-pages.py. Page published 31 October 2026. If the manufacturer has changed the specification, tell us and the dataset, the preset and this page change together.